VENEER SECTION

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features:
• Having capacity for peel log of length 2700mm.
• Having capacity to peel 15' GIRTH.
• Having hydraulic & pneumatic functions.
• Compressor with its 3 HP motor.
• Power Pack with its 3 HP × 2 Nos. motor.
• A/c Frequency Variable Drive (VFD) for variable speed of Main   Motor.  • A/c Frequency Control for variable drive (in this case the   conventional Lorry's Gear Box would be replaced with Heavy Duty   Gear Box from very reputed manufacture to compensate the   torque.)• Pneumatic clutch system for the Main Drive.
• Ball Screw Nuts in place of Conventional feed screws which   ensure no backlash resulting in smooth & uniform thickness of   veneer.• Pneumatic Brake for the tightening of Log.
• Quick movement of the Pressure Bar is hydraulically operated.
• Short conveyor for veneer outfeed.
• Electric Control Panel.
• Machine will be with knife & electric motors i.e. 60H.P. (100 H.P.   Optional) for Main Drive + 5HP x 2 for the movement of the   Spindles + 5 H.P. for the movement of the carriage + 2 HP motor   for the quick lifting of pressure bar.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -
• Very heavy duty machine.
• High Speed.
• With required motors.
• Hydraulic Power Pack.
• With Knife.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -
• Very heavy duty machine.
• High Speed.
• Hydraulic Power Pack.
• With Knife.
• Pinion Type Rollers.
• Rollers to motor - gear box are driven by the means of Chain.
   (Optional With V-Belts)• Knife holding system is with stud bolt and nut.
• All control relay of Panel is of Pin & Clamp type.
• All Sensors having safety guards.
• All gear boxes having Cast Iron (CI) body.
• Having 2 motors for the double rollers.
• Having 2 motors for the pressure bar roller.
• All rollers have individual gear-box motor.
• With required motors.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -
• Can peel upto 500 mm diameter.
• 2 Nos. Motors for Pressure Bar rollers.
• Veneer outfeed speed 65 m/min.
• Log Punch System.
• Heavy Duty Gear Box.
• Required Motors.
• Knife.
• Conveyor belt on the exit side - to take out
   the veneer after being cut in the required
   size by clipper.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -  

•  Can peel upto 500 mm diameter.

•  Veneer outfeed two speed 45~ 100 
   m/min.

•  Inbuilt clipper.

•  Log Pusher for Centering.

•  Log Punch System.

•  Heavy Duty Gear Box.

•  Servo Motor.

•  Required Motors.

•  Conveyor belt on the exit side - to take out 
    the veneer after being cut in the required  
    size by clipper.

 

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features :-
• Fitted with Water Tank.
• Reduction Gear Box.
• Coolant Pump.
• Required Electric Motor.

Product Price :Get Latest Price

Product BrochureProduct Details:

8 Section having 3 Decks having working width of 4600mm. Jet Ventilated Automatic Roller Track 16000MM in Length of the heating section and 3200 MM in Height having 8 nos. Compact Drying Chambers with 3 Decks. 1200 MM Single Cooling Section and 1900 MM long Single Roller Feeding Arrangements for each Deck.     
    The Dryer will be supplied with variable Speed (Frequency Drive) Gear Box, Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain painted with Red Oxide Primer and Two coats of finished enamel paint.  The Dryer will be completed with 11 nos. Electric Motors compact panel boards, Electrical controls, Relays, Heat Exchangers and Temperature Meters.

Product Price :Get Latest Price

Product BrochureProduct Details:

6 Section having 3 Decks, having working width of 4600mm.  Jet Ventilated Automatic Roller Track 12,000 MM in Length of the heating section and   3200 MM in Height having 6 Nos. Compact Drying Chambers with 3 Decks,1200 MM cooling section and 1900 MM long Single Roller Feeding Arrangement for each deck.  
    The   Dryer will be supplied with variable drive (Frequency Drive) Gearbox Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets   and 1” Pitch Drive Roller Chain painted with Red Oxide Primer and two coats of finished enamel paint. The Dryer will be complete with 9Nos.Electric Motors and one Electrical Control Panel, Temperature Meter.        
Horse Power Required :-23 H.P.

Product Price :Get Latest Price

Product BrochureProduct Details:

12 Section having 4 Decks. Jet Ventilated Automatic Roller Track 24000 MM in Length of the heating section having working width of 4600mm. and 3300 MM in Height having 12 nos. Compact Drying Chambers with 4 Decks.  1200 MM Single Cooling Section and 1900 MM long Single Roller Feeding Arrangements for each Deck.
    The Dryer will be supplied with 2 nos. variable Speed (Frequency Drive), 2 nos. Gear Box, Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain painted with Red Oxide Primer and Two coats of finished enamel paint.  The Dryer will be completed with 16 nos. Electric Motors compact panel boards, Electrical controls, Relays, Heat Exchangers and Temperature Meters.

Product Price :Get Latest Price

Product BrochureProduct Details:

10 Section having 3 Decks having working width of 4600mm. Jet Ventilated Automatic Roller Track  20000 MM in Length of the heating section and 3200 MM in  Height having 10 nos. Compact Drying Chambers with 3 Decks.  1200 MM Single Cooling Section and 1900 MM long Single Roller Feeding Arrangements for each Deck.     
    The Dryer will be supplied with variable Speed (Frequency Drive) Gear Box, Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain painted with Red Oxide Primer and Two coats of finished enamel paint.  The Dryer will be completed with 13 nos. Electric Motors compact panel boards, Electrical controls, Relays, Heat Exchangers and Temperature Meters.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -

•  With required motors & electrical panel.

•  Strong Structure having chain transmission
   & adjustable chain conveyors which runs
   throughout, holds the veneer from top &
   bottom while grinding / scarfing takes place
   thus ensuring the stable grinding / beveling.

•  Grinding station / Heads can tilt / Incline to
   Grinding / Scarf / Beveling of edges of the
   Core Veneer.

• Can scarf / grind length of the Core Veneer
   from 700 ~ 1300 mm.

•  2 Nos. Grinding Heads on the either side of
   the machine i.e. total 4 Grinding Heads.

•  The grinding head can be adjusted
   according to the thickness of core veneer.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -

•  With required motors & electrical panel.

•  Stable pressing force.

•  Short Bonding time as short as 20 ~ 25
    second or one cycle in 30 ~ 35 second.

•  Auto temperature control & auto
   positioning of Core Veneer.

•  Adjustable length 600 ~ 1300 mm.

• Capable of joining end less / Continues
   length of Core Veneer.

•  Cutting by the clipper to any length i.e. upto
   8’ Situated at the rear end of the machine
   (In Built).

•  Machine is completed with stacker / scissor
    lift.

•  One operator can work on two machines.

•  One Grinding machine can feed core veneer
   for 4 sets of joining / splicing presses.

•  Shortest length of core veneer can be
    jointed as small as 200 mm.

Product Price :Get Latest Price

Product BrochureProduct Details:

RING DEBARKER MACHINE               

•  With Electrical and Accessories

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -
• Machine with sensors to cut the defective portion of core veneer.
• Can cut the set (fixed) width.
• With electricals & accessories

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : - • X axis is for width wise cutting.• Y axis is for length wise cutting.• A axis controls width wise cutting automatically (auto                    positioning of the cutting unit).• B axis controls length wise cutting automatically (auto     
        positioning of the cutting unit)• C axis is clubbed together with A axis for controlling  the
        laser width wise which moves along with the cutting         
        unit without servo motor.• D axis for controlling of the laser length wise i.e. the 
        movement of the laser beam shall auto mechanically           
        perform this Function according to the position of the cutters
        through touch screen by the means of small servo       
        motor.• This model facilitates the cutting of plywood of the size 3’ to
        4’ width wise and 6’ to 8’ length wise (optional           model
        for 2.5' to 4' & 5' to 8' also available.)• The sliding table of the machine is driven by servo motor
        (feeding motor) for better results.• Front clamp for better holding of the plywood resulting in
        accurate sizes & quality.• The sliding table having variable feed speed.• This machine is equipped with scoring saw prior to main saw.• The machine is equipped with Laser Beam which enhance the
        accuracy of the edge cutting.• Stacker having Scissor Lift.• With Electrical motors & panel (All major electrical
        components are of SCHNIEDER make)• Motorized adjustment of sizes through the PLC system by the
        means of servo motor for the accurate positioning.• Have two cutting cycle.• Can cut 18 mm×3pcs. at a time.• Stacker / scissor lift.

Product Price :Get Latest Price

Product BrochureProduct Details:

5 Section having 3 Decks, having working width of 4600mm. Jet Ventilated Automatic Roller Track 10,000 MM in Length of the heating section and 3200 MM in Height having 5 Nos. Compact Drying Chambers   with 3 Decks, 1200 MM cooling section and 1900 MM long Single Roller Feeding Arrangement for each deck.   
           The Dryer will be supplied with variable drive (Frequency Drive), Gear Box Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain painted with Red Oxide Primer and two coats of finished enamel paint.  The Dryer will be complete with 8 Nos. Electric Motors and one Electrical Control Panel, Temperature Meter.
Horse Power Required :-20 H.P.

Product Price :Get Latest Price

Product BrochureProduct Details:

4 Section having 3 Decks, having working width of 4600mm. Jet Ventilated Automatic Roller Track 8000 MM in Length of the heating section and 3200 MM in Height having 4 nos. Compact Drying Chambers with 3 Decks.  1200 MM Cooling Section and 1900 MM long Single Roller Feeding Arrangements for each Deck.
              The Dryer will be supplied with variable Drive (Frequency Drive), Gear Box, Chain Tension   Devices, Cast Iron Bushes, Pinions Sprockets and 1” Pitch Drive Roller Chain painted with Red Oxide Primer and two coats of finished enamel  paint.  The Dryer will be complete with 7 nos. Electric Motors compact panel boards, Electrical controls, Relays, Heat Exchangers and Temperature Meters.
Horse Power Required :-     17 H.P.

Product Price :Get Latest Price

Product BrochureProduct Details:

5 Section having 4 Decks.  Jet Ventilated Automatic Roller Track 10000 MM in Length of the heating section having working width of 4600mm. and 3300MM in Height having 5 nos. Compact Drying Chambers with 4 Decks. 1200 MM Cooling Section  and 1900 MM long  Single Roller Feeding  Arrangements for each Deck.
    The Dryer will be supplied with 2 nos. variable Speed (Frequency Drive), 2 nos. Gear Box, Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller  Chain painted with Red  Oxide  Primer and Two coats of finished enamel  paint.  The Dryer will be complete with 8 nos. Electric Motors compact panel boards, Electrical controls, Relays, Heat Exchangers and Temperature Meters.
Production Capacity on thermic fluid:- Appx. 4.70 Lacs Sqr. Ft. on 1 mm. basis.   

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with :-
• Jet Ventilated Automatic Roller Track Dryer 4600mm in working    width, 16000mm in Length of the heating section and 3300mm     in  height.• 8 Nos. Compact   Drying Chambers with 4 Decks,
• 1200 MM cooling section having 2 nos. fans and 2 nos. motors, • 1900 mm long single roller feeding arrangement for each deck.    • Variable drive (Frequency Drive), Gear Box Chain Tension Devices,    Cast  Iron  Bushes, Pinions,  Sprockets   and 1” Pitch  Drive     Roller  Chain.• Having 2 Nos. A/C variable drive (frequency drive) & gear box   (One A/C variable frequency drive for 2 decks each). • The Dryer will be complete with 12 Nos. Electric Motors and one    Electrical Control Panel, Temperature Meter.

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features :-

•  Cuts veneer Pneumatically. 

•  Heavy Duty cutting capacity.

•  Front & Back Conveyor Table.

•  Required electric Motors.

 

Product Price :Get Latest Price

Product BrochureProduct Details:

• Very heavy duty machine specially designed for hardwood logs.
• Hydraulic Power Pack.
• Manual knife clamping.
• With Knife.
• Rollers to motor - gear box are driven by the means of chain.
• Knife holding system is with stud bolt and nut.
• All control relay of Panel is of Pin & Clamp type.
• All Sensors having safety guards.
• All gear boxes having Cast Iron (CI) body.
• Having 2 motors for the double rollers.
• All rollers can have individual gear-box motor.
• With required motors.

Product Price :Get Latest Price

Product BrochureProduct Details:

HEAVY DUTY DEBARKING MACHINE 
MODEL KI-1300-HDD        KALYAN MAKE
Complete with following features : -
•  With required motors.
•  Hydraulic Power Pack.
•  With Knife.

Product Price :Get Latest Price

Product BrochureProduct Details:

• Temperature, Speed, Zig-Zag regulations.
• Machine complete with 1 Thread Spool, Needles and Pliers.

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features:
• Cutting length 3100 mm.
• Presser beam opening 75 mm.
• Fully hydraulic machine.
• Heavy main frame.
• Swinging movement of the knife to have best cutting quality.
• Torsion bar to have presser beam always parallel to the table.
• Automatic working cycle: presser moves down-knife cuts-presser   moves up in only one operation.• Squaring arm on the table.
• Millimeter counter.
• Electric rear feed.
• Cutting edge light.
• Photocell curtain, back tables, back guards

Product Price :Get Latest Price

Product BrochureProduct Details:

•  With electrical & accessories. 

 

 

Product Price :Get Latest Price

Product BrochureProduct Details:

STRAIGHT FORWARD CORE FINGER JOINT MACHINE With the following features: -• The operation is controlled by the PLC system and very simply
   and easier to operate.• Servo precise positioning. • Capable of making 5’×3’ ~8’×4’ veneer sheet.• With Stacker.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -

•  Can peel upto 500 mm diameter.

•  2 Nos. Servo Motors for Double Drive
    System for Double Rows of Rollers.

•  2 Nos. Servo Motors for Pressure Bar
    rollers.

•  Servo Motor for the feed drive.

•  Veneer outfeed speed 45 ~ 150 m/min.

•  Servo Motor for Inbuilt Clipper.

•  Log Punch System.

•  Heavy Duty Gear Box.

•  Required Motors.

•  Conveyor belt on the exit side - to take out
    the veneer after being cut in the required
    size by clipper.

 

Product Price :Get Latest Price

Product BrochureProduct Details:

VACUUM STACKER  (CHINA MAKE)

•  With Conveyor.

•  To be fitted after the Spindleless machine.

 

Product Price :Get Latest Price

Widely demanded in wood processing industries, this Veneer Band Dryer is an ideal option for removing moisture from veneer. The offered dryer is designed and manufactured by our ingenious professionals using premium quality components and progressive techniques in line with set international standards. Also, provided dryer is rigorously checked on set quality parameters to ensure its quality. Clients can purchase this Veneer Band Dryer from us in several designs and technical specifications within budgeted costs.

Features:

• Reliable operation

   

• Longer service life

   

• Energy efficient

   

• Unmatched performance

  Our range also includes:

• Veneer Band Dryer 2 Section 2 Decks

• Veneer Band Dryer 3 Section 2 Decks

• Veneer Band Dryer 4 Section 2 Decks

• Veneer Band Dryer 5 Section 2 Decks

• Veneer Band Dryer 6 Section 2 Decks

• Veneer Band Dryer 7 Section 2 Decks

• Veneer Band Dryer 8 Section 2 Decks 

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features:
• Having capacity to take 10’ girth.  
• Gear Box fitted with Pneumatic Clutch.
• Compressor with motor.
• Machine will be without knife & electric motors i.e.  30 HP for Main
  Drive + 3 H.P. for the movement of the Spindles + 3HP for the
  movement of the carriage.

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features:

•  Hydraulically Operated Back Up Rollers.

•  Having capacity to take 10’ girth.

•  Compressor with its 2 HP motor.

•  Power Pack with its 3 HP motor.

•  Electric Control Panel.

•  Gear Box.

•  Pneumatic clutch & Brake system for the
    Main Drive.

•  Pneumatic Brake for the tightening of Log.

•  Machine will be without knife & electric
   motors i.e.  40 HP for Main Drive + 3HP for
   the movement of the Spindles + 3 HP for 
   the movement of the carriage.

• The dia. of left over roller is f1⁵/₈” ~ 2”.

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features:

•  Having capacity for peel log of length
   2700mm.

•  Hydraulically Operated Back Up Rollers.

•  Having capacity to peel 16' girth.

•  Compressor (Anest Iwata / Elgi Make)
    with its 3 HP motor.

•  Power Pack with its 3HP x 3 Nos. motor.

•  Electric Control Panel.

•  Heavy duty Gear Box in place of
   conventional Lorry's Gear Box to
   compensate the torque.

•  A/c Frequency Variable Drive for
   variable speed. 

•  Pneumatic clutch system for the Main
   Drive.

•  Ball Screw Nuts in place of
   Conventional feed screws which 
   ensure no backlash resulting in
   smooth & uniform thickness of
   veneer.

•  Pneumatic Brake for the tightening of Log.

•  Machine will be with knife & electric
   motors i.e. 100H.P. for Main Drive + 5
   HP x 2 for the movement of the Spindles +
   5 H.P. for  the movement of the carriage.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -
• Can peel upto 500 mm diameter.
• Double Drive System for Double Rows of Rollers (2 Motors).
• 2 Nos. Motors for Pressure Bar rollers.
• Veneer outfeed speed 45 ~ 110 m/min.
• Inbuilt Clipper.
• Log Punch System.
• Heavy Duty Gear Box.
• Servo Motor for the feed drive as well for clipper.
• Required Motors.
• Conveyor belt on the exit side - to take out the veneer after being
  cut in the required size by clipper.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : -
• Can peel upto 500 mm diameter.
• Double Drive System for Double Rows of
  Rollers 2 Motors).• 2 Nos. Motors for Pressure Bar rollers.
• Veneer outfeed speed 30 ~ 110 m/min.
• Inbuilt Clipper.
• Log Punch System (Pneumatic pusher).
• Rollers with diamond cut tie (cross type).
• All gear box having Cast Iron (CI) body.
• Heavy Duty Gear Box.
• The screw nut is of white metal /
  Phosphorus bronze. • Having provision of scoring knife for cutting
  4’, 3’ & 2½’ veneer.• Knife holding system having stud bolt and
  nut type.• Servo Motor for the feed drive as well for
  clipper.• PU Pressure Bar Roller of the Clipper.
• Can change the width of the veneer through
  the touch screen.• Required Motors.
• Conveyor belt on the exit side - to take out
   the veneer after being cut in the required
  size by clipper.• Having two slide guide one at the Top &
  another at the Bottom (very reliable
  system) thus absorbs jerking resulting in
  smoot & accurate veneer.

Product Price :Get Latest Price

Product BrochureProduct Details:

Complete with following features : - .    
•    Double Drive System for Double Rows of Rollers (2 Motors).
•    2 Nos. Motors for Pressure Bar rollers.
•    Veneer outfeed   speed 70 m/min.
•    Outside clipper
•    Heavy Duty Gear Box.
•    Servo Motor for the feed drive as well for clipper.
•    Required Motors.
•    Conveyor belt on the exit side - to take out the veneer after            being cut in the required size by clipper.
•    Easy to Operate.
•    Suitable for Hard / Very Hard & Soft Wood species.
•    Heavy Duty Construction.
•    Smooth Veneer.

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features :-

•  Fitted with Water Tank.

•  Reduction Gear Box.

•  Coolant Pump.

•  Required Electric Motor.

Product Price :Get Latest Price

Product BrochureProduct Details:

GUILLOTINE JOINTER MACHINE 1400 MM

With the following features :-

•  Heavy Duty Single Cut.

•  Hydraulically Operated.  

•  Having cutting capacity from 75 to 100mm
   Bunch

•  Automatic Braking Arrangement with the
   help of Magnetic Brakes.

•  One No. Cutting Knife.

•  Hydraulic Power Pack.

•  Required Electric Motor.

 

Product Price :Get Latest Price

Product BrochureProduct Details:

SHORT CORE COMPOSER / FALI COMPOSER MODEL SCC-1300
Complete with following features : -
• Minimum 50mm width of the core veneer can be jointed.
• With Electricals & Accessories

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features
• Structure is made of whole steel plate (laser cut) and not    fabricated with the channels.• The operation is controlled by the PLC system and much easier to    operate.• The front and rear Jointing are synchronized that makes the    veneer jointed very precise and prevents the overlap.• The machine is operated by one-person thus this auto process    saves labor.• High-precision detection, to minimize the amount of shear.
• Servo precise positioning.
• Special high-strength thread enhance product’s longitudinal tensile    strength and flexibility thus the core panel does not break. • High-strength hot melts glue is used.
• PLC use DELTA / TECO Make.
• All the Servo Motors & Drives are of INVT Make.

Product Price :Get Latest Price

Product BrochureProduct Details:

With the following features:
• The operation is controlled by the PLC system and very simply   and  easier to operate.• The front and rear Jointing are synchronized that makes the    veneer jointed very precise and prevents the overlap.• The machine is operated by one-person thus this auto process    saves labor.• High-precision detection, to minimize the amount of shear.
• Servo precise positioning.
• Special high-strength thread enhance product’s longitudinal tensile    strength and flexibility thus the core panel does not break. • High-strength hot melts glue is used.
• PLC use China Make.
• All the Servo Motors & Drives are of INVT Make.
• The machine has fixed cold press unit.